There may come a time where you feel like your car is pulling to one side. Maybe it looks like the steering wheel is crooked or the tires aren’t wearing evenly across the tread.
These observations can be indicators that the wheels are out of alignment. Different factors can cause this, including potholes, speed bumps and curbs.
Suspension wear can be the culprit, too. You may notice certain noises when steering and suspension parts are worn or broken. The problem could also be found when an automotive technician is inspecting the vehicle or performing a tire alignment.
How suspension parts affect adjustments
When conducting wheel alignments, we want to make sure that the caster, camber and toe are in the correct parameters.
“Caster” explains how much wheels tilt toward a car’s front and back. Meanwhile, camber describes their inward and outward angle. Toe is a wheel’s left and right position in relation to the center of a vehicle.
Tie rod ends have a ball joint. If they have play, it’s going to primarily impact the toe adjustment. The steering wheel will mainly be affected by the tie rod ends but can be impacted by the control arms.
Worn out bushings will make the caster and camber askew and they aren’t always adjustable. So replacing the component is needed.
Worn shocks and struts may not cause a vehicle to be out of alignment but could result in it traveling incorrectly, especially when going around corners.
Road conditions and the suspension
Components may go bad overtime or be impacted by a road condition.
For example, control arms sometimes become bent when motorists travel over potholes or come in contact with a curb.
When your tire hits a pothole, the energy has to go somewhere. The tire is going to take some of that impact. Then, it’s going to travel through the wheel and wheel hub. Depending on how the energy impacts the tire will affect the next component.
Most of the time if you hit a pothole and have a standard modern suspension (keep in mind there are other variations), the majority of that impact is going toward the tie rod end and lower ball joints. Those ball joints are attached to the steering knuckle, meaning they are the first steering and suspension parts to catch that energy before traveling down the line.
Tie rod ends connect to the rack and pinion, which have bushings and other wearable components. On the backside of the control arms are bushings. All of those components are designed to take some impact, but they can only handle so much. That energy could be greater than what they are capable of taking.
When and why to get an alignment
We recommend car alignments once a year or every 15,000 miles. This service should also be done when tires and suspension components are replaced.
If your car feels like it isn’t driving straight or you don’t remember the last time it received a tire alignment, talk to your auto repair shop about having one performed.
Regular alignments provide several benefits, like keeping your tires from wearing unevenly and prematurely.
Steve’s Auto Repair & Tire is an authorized Goodyear tire dealer located near Dale City, Virginia. Automotive repair services are performed on all makes and models, including BMW and Mercedes. Services include oil changes, brakes, alignments, inspections, and computer engine diagnostics.



